Warning: set_time_limit() has been disabled for security reasons in /home/html/aviatorshop.eu/public_html/modules/deleteconnections/deleteconnections.php on line 2
ACL4 - Electronic Anti Collision Light w. FLARM interface

ACL4 - Electronický protizrážkový maják s FLARM podporou



Na objednávku

399,00 € / 332,50 € bez DPH

Brand New ACL4 
with FLARM-Interface and Intelligent Synchronization

ACL4 - for fuselage or vertical stabilizer installation

The technology carries on - so we developed the new ACL4 for you. With LEDs of the newest generation we were able to boost the brightness of about 50%. Simultneously we reduced the power consumption remarkably. This makes an efficiency enhancement of about 100%!

As worlds first we integrated a FLARM-Interface in an anti collision light for motorized aircrafts in order to increase the visibility and therefore the safety in the airspace. The by the Power-FLARM unit provided signals increase the light pulses of the ACL4 and therefore rises the attentiveness.

As a matter of course all our LED position lights / ACLs are water and seawater resistent. Since the electronic parts are completely integrated in the ACL4, no black box or other items are needed.

Like all our other ACLs, the ACL4 is completely sealed in high grade optic plastic. As all electronic components are in the ACL4 integrated, there is no additional place needed.

The extremely bright, red sequencing light flash has a beacon angle of 360° and is visible at 30° below and above the horizontal plane.

For easy connection, the ACL is already provided with a 1,5/0,25 mm? four-wire-cable. It can be installed on the fuselage or vertical stabilizer by its flange footing and some additional silicone.

Intelligent Synchronization

The integration our well proven Intelligent Synchronization in the ACL4 allowes a chronological sequence of power consumption for the connected anti collision lights and prevents battery and generator from becoming overloaded.

Technical Specifications

Operating voltage10 -17 volts D. C., typically: 12.8 - 13.4 volts (on board power supply)
Wattageapprox. 10 watts
InterfaceFLARM and Intelligent Synchronization
Diameterapprox. 44mm
Heightapprox. 39 mm
Flange to flangeapprox. 61 mm
Drill hole4,5 mm
Weightapprox. 86 gr incl. connecting cables

Žiadne recenzie.

Pridajte Vašu recenziu

Vaše meno:
Vaše hodnotenie:
Vaša recenzia: